1. General
Page 4 M0153AEA_Inst_CMAX-LHM2 Installation Guide for CMAX-LHM2 Antennas
1. General
Notes:
o Please read the complete description before starting the installation. Be sure
that connectors are properly sealed from water if no cables are connected to
them after installation.
o To minimize the risk of thread seizure, an anti-corrosion oil or grease can be
used on nuts and bolts.
Tools required: Wrench,
width: 13 mm
2. Assembly
Fit the 3 parts together and fasten with screws M8 x 20, washers, and spring
washers (M8 torque: 27 Nm).
To Next Page
Loading...
