3. Wall Mounting
M0153AEA_Inst_CMAX-LHM2 Installation Guide for CMAX-LHM2 Antennas Page 5
3. Wall Mounting
To mount the antenna to a wall (pole mounting see next chapter), proceed as follows:
1. Mark 4 holes onto the wall as shown in the drawing above (diameter of the 4
holes: 10 mm).
2. Drill four holes into the wall and insert appropriate expansion bolts into the
holes.
3. Attach the antenna pedestal.
(Note: Expansion bolt parts have to be provided by the user.)
To Next Page
Loading...
