1 General
Page 9
11. Use this equipment only for the purpose specified by the manufacturer. Do not
carry out any modifications or fit any spare parts which are not sold or
recommended by the manufacturer. This could cause fires, electric shock or other
injuries.
12. Due to power dissipation, the repeater may reach a very high temperature. Do not
operate this equipment on or close to flammable materials.
13. Before opening the unit, disconnect power supply.
14. ESD precautions must be observed! Before commencing maintenance work, use
the available grounding system to connect ESD protection measures.
15. This unit complies with European standard EN60950.
16. Make sure the repeater settings are according to the intended use (see also
product information of manufacturer) and regulatory requirements are met.
17. Although the repeater is internally protected against overvoltage, it is strongly
recommended to earth the antenna cables close to the repeater’s antenna
connectors for protection against atmospheric discharge.
18. Laser radiation! Do not stare into the beam; do not view it directly or with optical
instruments.
To Next Page
Loading...
Need help?
General
