D SERIES Ceiling Loudspeakers Installation and Operation Manual Page 5
Box Contents
Models: D4LP, D4, D5, D6, D6-B, D8, D10,
D10SUB
• Ceiling loudspeakers secured in
their back cans (2)
• Grilles (2)
• C-ring support plates (2)
• Cutout template (1)
• Tile bridge support rails (4)
• Paint masks (2)
• Small flat screwdriver (1)
Packing List and Product Identification
Community D SERIES Ceiling Loudspeakers are engineered and manufactured
to be rugged and they are carefully packed in sturdy cartons. However, it is wise
to thoroughly inspect each unit after it has been removed from the packaging,
as damage could occur during shipping.
Please note that once the shipment has left your dealer or the Community
factory, the responsibility for damage is always borne by the freight company.
If damage has occurred during shipping, you must file a claim directly with the
freight company. It’s very important to contact the freight company as soon
as possible after receiving your shipment, as most freight companies have a
short time limit within which they will investigate claims. Make sure to save
the carton and the packing material, as most claims will be denied if these
materials are not retained.
All D SERIES ceiling loudspeakers are shipped in pairs. Below is a representation
of what is included.
Loudspeakers
Grilles
C-ring Support Plates
24" (610mm) Tile Bridge Support Rails
Paint Masks Cutout Template Flat Screwdriver
To Next Page
Loading...
