SinoGNSS
○
R
N5 User Guide
14
Tip1: Default memory for N5 receiver is 8GB, and 16GB, 32GB optional.
Tip2: The receiver will stop recording raw data if the internal memory runs out.
4.4 RINEX Convert
After copy raw observation data to PC, you can convert the data from ComNav
binary format (*.cnb) to RINEX in CRU software.
1. Start CRU software;
2. Click Folders and select the path of your CNB data;
3. Click Rinex Convert to check all raw data on main window. Right click on the file to
modify antenna, Convert Settings and Convert to RENIX, or use fast icon in standard
bar.
To Next Page
Loading...