ComNav Technology Sino GNSS N5 - System Configuration and Maintenance; Register N5 via Survey Master

SinoGNSS
○
R
N5 User Guide
45
Choose NMEA Port -> Baud -> check commands you want to output.
Data transfer: for transmit all the BT output to the address.
7.6 Register N5 via Survey Master
Normally, the register code is like this:
ID:03401012 $$:49-0B-79-23-00-00-00-95-85
FUNCTIONREG:2207453726-3851620954-0949162572-0697504466-0613618189-0027539229
Note: The length of code may different according to different requirements.
Following shows two methods to register the receiver.
 Register function
For Register function, you need only enter the number:
2207453726-3851620954-0949162572-0697504466-0613618189-0027539229
Log com1 gpgga ontime 1
This option is same as
the command
“saveconfig”.