EasyManua.ls Logo

ComNav Technology Sino GNSS N5 - Internal GPRS Mode for RTK

ComNav Technology Sino GNSS N5
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SinoGNSS
R
N5 User Guide
27
Configure the Rover as below:
Make sure your controller can access to internet via SIM card or Wi-Fi, then
run Survey Master Software.
Build Bluetooth connection as shown in chapter 5.4, Click Device -> Rover ->
PDA CORS.
5.8 Internal GPRS Mode
For Internal GPRS mode, N5 receiver supports Point to Point/Points and Ntrip client
mode. To acquire the APN (access point number) from the mobile service provider,
you need to insert a SIM card into the N5 receiver. It commonly acquires the APN
from the mobile network provider, otherwise try to get via the link:
1
A N5 receiver
2
A controller with SIM card and
software
3
A range pole with bracket
Enter CORS DNS/IP address and
port-> Click Source List and select
the proper source -> enter User
and password.
After Confirm succeed, the diff
LED (yellow) on receiver will flash,
and software can get a fixed
result.
It also provides TCP protocol.

Related product manuals