SinoGNSS
○
R
N5 User Guide
46
Register via commands
You need copy the whole code, include the word ‘FUNCTIONREG:’
FUNCTIONREG:2207453726-3851620954-0949162572-0697504466-0613618189-0027539229
8 Firmware Upgrade
Prepare a Lemo to USB cable.
1. Copy the firmware software to your PC.
2. Open the firmware program, choose “APP->Link setup”, select USB to connect
with receiver, and then click “OK”.
Copy the whole code,
and enter the cursor to
next line, then send.
Send command: LOG REGLIST
To check receiver register status.
To Next Page
Loading...