SinoGNSS
○
R
N5 User Guide
39
6.5 Site calibration/Grid Shift
6.5.1 Site calibration
Site calibration is commonly needed once in one project, and all the points will be
collected based on calibrated datum system.
1. Choose manual pair or auto pair.
2. If you choose manual pair, you can directly enter at least three groups’ point to
compute. (for example, take K1,K2,K3 as known points, take A1,A2,A3 as
measured points) After click Compute to calculate, the software will calibrate
To Next Page
Loading...