ComNav Technology Sino GNSS N5 - Page 45

SinoGNSS
○
R
N5 User Guide
40
automatically.
3. If you choose auto pair, it will auto compute according to the same name for
known point and measured point. After click Compute to calculate, the software
will calibrate automatically.
4. Click Apply to confirm to replace datum. The value of H.Resid and V.Resid should
meet the requirement (H.Resid ≤ 0.015m, and V.Resid ≤ 0.02m).
Click to add
K1, K2, K3
Click to add
A1, A2, A3