ComNav Technology Sino GNSS N5 - PDA CORS Mode for RTK

SinoGNSS
○
R
N5 User Guide
26
 Rover station
 Click Device-> Base ->Add, select External radio.
5.7 PDA CORS Mode
Without setting up your own base stations, the N5 GNSS receiver can receive
correction data transmitted from continuously operating reference station via
PDA’s GPRS or WIFI. To do RTK survey in PDA CORS mode, it requires:
○
1
A N5 receiver
○
2
A Whip antenna
○
3
A controller with software installed
○
4
A range pole with bracket
 When start succeed, set up the
frequency channel, and Rover
frequency should be same.
 Be sure to set the same baud
rate as your CDL5 (default value
is 38400, you also can change in
Param tab based on your CDL5).