Need help?Do you have a question about the ComNav 1001 and is the answer not in the manual?
General| Brand | ComNav |
|---|---|
| Model | 1001 |
| Category | Autopilot System |
| Language | English |
Explains initialization, power steer, and autopilot control modes.
Describes the autopilot's PID controller, interfaces, and features.
Lists operating voltage, current, temperature, resolution, and size.
Details various drive system types and their connections.
Lists drive systems for different vessel types and steering.
Covers bracket and flush mounting procedures for the autopilot unit.
Explains connecting ComNav and non-ComNav fluxgate compasses.
Details power inputs, outputs, and interface connections for the distribution box.
Guides on mounting and aligning the rudder follower for accurate feedback.
Explains NMEA 0183 data for interfacing with navigation devices.
Details how the autopilot responds to cross-track error in NAV mode.
Describes how to enable/disable checksum evaluation for data accuracy.
Guides on setting the hard-over limits for rudder travel.
Explains the process of swinging the compass for accurate readings.
Details the functions of the five-position master select switch.
Explains the functions of the nine-button membrane keypad.
Describes how to initiate emergency and continuous turn maneuvers.
Covers operation in STANDBY, POWER STEER, and ADJUST KEY functions.
Explains how to steer the vessel using the PILOT mode.
Details autopilot operation when interfaced with navigation devices.
Specific instructions for the ComNav 101 remote control unit.
Specific instructions for the ComNav 201 remote control unit.
Specific instructions for the ComNav 211 remote control unit.
Lists and explains autopilot error messages and their causes.
Details errors related to panel buttons, memory, and system resets.
Covers errors from low voltage, no compass data, and missing nav data.
Explains errors related to rudder follower, rudder movement, and RAM.
Provides solutions for common problems like no power or rudder issues.
Confirms compliance with EMC standards and lists applicable sections.
Outlines the one-year and extended three-year limited warranty terms.
Lists modifications and updates made to the manual over time.
To Next Page
