Compac CNG Installation And Service Manual

Scheduled Servicing
Servicing
Compac Industries Ltd.
Page 24
www.compacngv.com
Scheduled Servicing
Weekly checks
 Check the sealing and operation of the three-way refuelling valve (see page 26).
 Check the sealing and operation of the solenoids. Refer to: Checking the Sealing of the Solenoid (see page 25)
Suggested 6-monthly service
 Check the post for leaks (see page 25).
 Check hoses for damage and electrical continuity
 Replace breakaway seals
 Replace 3-way refuelling valve seals and inspect ball for scratches and wear. Replace ball if necessary.
 Replace nozzle O-rings. Check that the nozzle is not damaged or bent, replace if necessary
 OEM Nozzles and Breakaways - Refer to manufacturer’s instructions
Suggested yearly service
In addition to all the checks listed in the 6-month service, carry out the following:
 Dismantle and clean the solenoid valves. Replace the seals and O-rings (see page 27).
 Check the loading post calibration. Meter Calibration (see page 40).
 Check the C4000 Processor Board is clean, dry and dust free.
 Check the C4000 flameproof box lid is bolted down tight and all glands are tight.

Compac CNG Specifications

General

Brand	Compac
Model	CNG
Category	Dispenser
Language	English