Compaq 486 - Chapter 5.4 Preparation Procedures

| | |-- Real Time Clock/Battery
||
5.9 | |-- POWER SUPPLY
||
5.10 | |-- FAN ASSEMBLY
||
5.11 | |-- I/O BOARD
|
5.12 |-- BASE PANEL
|
5.13 |-- MASS STORAGE DEVICES
| |-- Diskette Drive
| |-- Fixed Disk Drive
|
5.14 |-- ACTIVE MATRIX COLOR DISPLAY
| |-- Front Bezel
| |-- Display Assembly
| |-- Backlight Assembly
| |-- Display Inverter Board
| |-- Speaker Assembly
|
5.15 |-- POWER DISTRIBUTION BOARD
|
5.16 |-- KEYLOCK
Chapter 5.4 Preparation Procedures
Before beginning the removal and replacement procedures, complete the
following steps:
1. Turn off the computer.
2. Disconnect the AC power cord from the AC outlet and from the computer
(Figure 5-1).