P
RESARIO
M
OBILE
I
NTERNET
PC B
EYOND
S
ETUP
G
UIDE
U
SING
THE
CD
OR
DVD D
RIVE
5-3
800 SE
RIES
If your Notebook power is off,
you will not be able to eject a
disc from the CD or DVD
drive. To remove a disc
without powering up your
Notebook, you must eject the
disc from the drive manually.
3. Place the disc, label side up (unless it is a double-sided
DVD), into the round area of the tray. Gently press the disc
down onto the center spindle of the tray until the disc snaps
into place.
Ä
Caution: Before closing the disc tray, ensure that the disc snaps
onto the spindle in the center of the tray. You can damage the disc
and your Notebook if the disc is not seated properly.
4. Push the tray back into the drive until the drive locks
into place.
Removing a Disc
To remove a disc from the drive,
complete the following steps:
1. Press the Eject button on
the drive.
2. Remove a disc from the tray, gently pushing down on the
center spindle while pulling up on the outer edges.
Avoid touching the surface of the disc.
3. Push the tray back into the drive until it locks into place.
To Next Page
Loading...
Need help?
General