P
RESARIO
M
OBILE
I
NTERNET
PC B
EYOND
S
ETUP
G
UIDE
U
SING
THE
CD
OR
DVD D
RIVE
5-15
800 SE
RIES
5. When prompted, insert the Adaptec Update Diskette if one
was provided with the Adaptec Easy CD Creator software.
Follow the on-screen instructions to continue the installation.
Note: If an Adaptec Update Diskette did not come with the software, click
Skip and follow the on-screen instructions to continue installation.
6. When the installation is complete, click Finish.
Take Two
Take Two is used to back up the contents of your hard disk to
a single or multiple CDs. After your data is backed up to CD,
you can easily restore all selected files.
To install Take Two, complete the following steps:
1. From the Adaptec Installation dialog box, click Take Two
and follow the on-screen installation instructions.
2. When prompted, select a location on the hard disk to store the
Take Two program, or accept the recommended location, and
then click Next.
3. When prompted, select a folder where the program icons will
be placed. Click Next to continue installation.
4. When prompted, insert the Adaptec Update Diskette if one
was provided with the Adaptec Easy CD Creator software.
Follow the on-screen instructions to continue the installation.
Note: If an Adaptec Update Diskette did not come with the software, click
Skip and follow the on-screen instructions to continue installation.
5. When setup is complete, click OK.
To Next Page
Loading...
Need help?
General