EasyManua.ls Logo

Compaq CONTURA AERO - Page 97

Compaq CONTURA AERO
125 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Recommended Action: Replace the keyboard.
---------------------------------------------------------------------------
Message: 301 Keyboard Error
Beeps: None (Beeps can be disabled by the user from the
Computer Setup utility.
Probable Cause: Bad results from keyboard test
Recommended Action: Replace the keyboard.
---------------------------------------------------------------------------
Message: 301 Keyboard Error
Beeps: None (Beeps can be disabled by the user from the
Computer Setup utility.
Probable Cause: Keyboard failed interface test
Recommended Action: Replace the keyboard.
---------------------------------------------------------------------------
Message: 303 Keyboard Controller Error
Beeps: None (Beeps can be disabled by the user from the
Computer Setup utility.
Probable Cause: 8042 error clearing the output buffer
Recommended Action: 1. Replace the keyboard
2. Replace the trackball and trackball cable.
3. Replace the system board.
---------------------------------------------------------------------------
Message: 303 Keyboard Controller Error
Beeps: None (Beeps can be disabled by the user from the
Computer Setup utility.
Probable Cause: Keyboard controller (8042) self test failed
Recommended Action: 1. Replace the keyboard.
2. Replace the trackball and trackball cable.
3. Replace the system board.
---------------------------------------------------------------------------
Message: 303 Keyboard Controller Error
Beeps: None (Beeps can be disabled by the user from the
Computer Setup utility.
Probable Cause: System board keyboard controller
Recommended Action: 1. Replace the keyboard.
2. Replace the trackball and trackball cable.
3. Replace the system board.
---------------------------------------------------------------------------
Message: 303 Keyboard Controller Error
Beeps: None (Beeps can be disabled by the user from the
Computer Setup utility.
Probable Cause: Reset of A20 failed

Related product manuals