Reference Guide
2-21
Writer: Dianne Fielden Saved By: Troy Witte Saved Date: 07/24/97 4:42 PM
Pages: 28 Words: 6156 Template: c:\template\commercial\comm.dot
File Name Ch2.doc Part Number 308336-001
Remote Security Management is performed in two stages:
1. System administrator uses the Remote Management Setup
software on a centralized management console to define
the security parameters.
2. System administrator uses a PC LAN management product
to distribute the settings over the network to remote
Compaq Deskpro 4000 Personal Computers.
For more information on enabling Remote Security
Management, refer to the online Remote Management
Administrator’s Guide.
Remote Wakeup and Remote Shutdown
Remote Wakeup and Remote Shutdown allow a system
administrator to power on and power off a client computer from
a remote location, supported by PC LAN management tools.
✎
Third-party software tools are required to remotely
distribute software.
To enable Remote Wakeup and Remote Shutdown, complete
the following steps:
1. Double-click the Network icon, located in the Control
Panel.
2. Double-click the Compaq Netelligent 10/100 TX
Embedded UTP Controller.
3. Select the Advanced Properties tab.
4. Select Remote Wakeup.
5. Change the value to ON.
6. Exit the Network control application.
For more information on using Remote Wakeup and Remote
Shutdown, refer to the online Remote Management
Administrator’s Guide.
To Next Page
Loading...
