Maintenance and Service Guide 5–1
5
Removal and Replacement
Procedures
This chapter provides removal and replacement procedures.
Phillips P1 screws are removed during disassembly. There are
48 screws, in nine different sizes, that must be removed, replaced,
and loosened when servicing the computer. Make special note of
each screw size and location during removal and replacement.
Refer to Appendix C, “Screw Listing,” for detailed information
on screw sizes, locations, and usage.
268135-002.book Page 1 Thursday, October 24, 2002 4:10 PM
To Next Page
Loading...
