Power
Software Guide 2–7
Initiating or Exiting Standby
Task Procedure Result
Initiate Standby. Press the
Fn+F3
hotkeys.*
or
■
In Windows 2000
Professional, select
Start > Shut Down >
Standby, then select
the OK button.
■
In Windows XP Home
or Windows XP
Professional, select
Start > Turn Off the
Computer > Standby.
(If the Standby option
is not displayed, press
the
shift
key.)
Power/standby light
blinks.
Screen clears.
Exit Standby. Briefly press the power
button.
Power/standby light
turns on.
Your work returns to
the screen.
*To use the
Fn+F3
hotkeys, briefly press the
Fn
key, then briefly press
the
F3
key. For more information about hotkeys, refer on this CD to the
Hardware Guide,
“Pointing Devices and Keyboard” section.
To Next Page
Loading...
