2–8 Software Guide
Power
Initiating or Exiting Hibernation
Task Procedure Result
Initiate
Hibernation.
If the notebook is on, briefly
press the power button
once.
If the notebook is in
Standby, briefly press the
power button twice.*
or
■
In Windows 2000
Professional, select
Start > Shut Down >
Hibernate, then select
the OK button.
■
In Windows XP Home
or Windows XP
Professional, select
Start > Turn Off the
Computer > Hibernate.
(If the Hibernate option
is not displayed, press
the
shift
key.)
Power/standby light
turns off.
Screen clears.
Exit
Hibernation.
Briefly press the power
button.
Power/standby light
turns on.
Your work returns to
the screen.
*This procedure works only if the power button is assigned to
Hibernation. The power button is set to Hibernation at the factory. For
information about changing the function of the power button, refer to
“Setting Power Procedure Preferences,” next in this section.
To Next Page
Loading...
