Compaq N800v - Evo Notebook - Pentium 4-M 1.7 GHz - Inserting or Removing a Primary Battery Pack

Battery Packs
Hardware Guide 3–3
Inserting or Removing a Primary
Battery Pack
Ä
CAUTION: To prevent loss of work when removing a battery pack
that is the sole power source, initiate Hibernation or turn off the
notebook before removing the battery pack.
To insert a battery pack, slide the battery pack into the battery bay
until it is seated
1
.
To remove a battery pack, slide and hold the battery release
latch
2
toward the rear of the notebook as you pull the battery
pack from the battery bay
3
.
To exit Hibernation, briefly press the power button.
Inserting or removing a primary battery pack
265656-001.book!!Page!3!!Monday,!June!17,!2002!!10:00!AM