4–10 Hardware Guide
Drives
Inserting a Drive into the MultiBay
1. Before inserting a hard drive into the MultiBay, insert the
drive into a MultiBay hard drive adapter as described earlier
in this section. (No other type of drive requires an adapter.)
2. With the connectors
1
on the drive or drive assembly (a hard
drive inserted into a MultiBay hard drive adapter) facing into
the MultiBay, slide the drive or drive assembly into the
MultiBay until it is seated
2
.
When a drive or drive assembly is correctly inserted into the
MultiBay, the notebook beeps 3 times.
Inserting a hard drive assembly into the MultiBay
265656-001.book!!Page!10!!Monday,!June!17,!2002!!10:00!AM