Compaq N800v - Evo Notebook - Pentium 4-M 1.7 GHz - Inserting or Removing a Multibay Battery Pack

3–4 Hardware Guide
Battery Packs
Inserting or Removing a MultiBay
Battery Pack
Ä
CAUTION: To prevent loss of work when removing a battery pack
that is the sole power source, initiate Hibernation or turn off the
notebook before removing the battery pack.
To insert a battery pack, slide the battery pack into the MultiBay
until it is seated
1
.
To remove a battery pack, slide and hold the MultiBay release
latch
2
toward the front of the notebook as you pull the battery
pack from the MultiBay
3
.
To exit Hibernation, briefly press the power button.
Inserting or removing a MultiBay battery pack
Ä
CAUTION: To prevent damage to the MultiBay when no device is in
the MultiBay, insert the weight saver to protect the bay opening.
The weight saver can be inserted or removed while the notebook is
on, off, in Standby, or in Hibernation.
265656-001.book!!Page!4!!Monday,!June!17,!2002!!10:00!AM