Battery Packs
Hardware Guide 3–15
Battery Conservation Procedures and
Settings
Using the battery conservation procedures and settings described
below extends the time that a battery pack can run the notebook
from a single charge.
Conserving Power as You Work
To conserve power as you use the notebook:
■
Turn off wireless and local area network (LAN) connections
and exit modem applications when you are not using them.
■
Disconnect external devices you are not using that are not
connected to an external power source.
■
Stop or remove a PC Card you are not using.
■
Remove a CD or DVD you are not using.
■
Use the
Fn+F7
and
Fn+F8
hotkeys to quickly lower and raise
screen brightness as you need it.
■
Use optional powered speakers instead of the internal
speakers, or use the volume buttons to quickly raise and
lower system volume as you need it.
■
Turn off a device connected to the S-video connector by
using the
Fn+F4
hotkeys or by turning off support for the
device in Windows.
■
Run the notebook on external power while formatting a
diskette.
■
If you leave your work, initiate Standby or Hibernation or
shut down the notebook.
265656-001.book!!Page!15!!Monday,!June!17,!2002!!10:00!AM
To Next Page
Loading...
