United States December 16, 2002
Maintenance & Service Guide
Presario 5600 Series Personal Computers
MSG Index | Home | Preface | Product Description | Troubleshooting | Illustrated Parts | Removal & Replacement
Jumpers & Switches | Specifications | Connector Pins | Power Cord Requirements
Removal and Replacement
Fan
Disassembly
Sequence
Hood
Front Bezel
Card Guides
Fan
USB Cables
Creativity Center
Mass Storage Devices
Memory
Option Card Retainer
Graphics Board
Fax/Modem
Serial Port
Homenet Daughter Board
Processor
Processor Goal Posts
System Board Cables
System Board
RTC Battery
I/O Panel
Power Supply
Removal
1. Perform the
preparation for disassembly
procedures.
2. Remove the hood.
3. Disconnect power cable from system
board.
4. Remove the screw on the rear of the
chassis at the top of the fan grid.
End of sequence.
5. Separate the fan from the chassis
by depressing the four tabs on the
fan at the rear of the computer.
6. Disconnect the fan cable (P4) from the
system board.
Replacement
To replace the fan, reverse the
removal procedure.
privacy statement and legal notices
To Next Page
Loading...
