Compaq Presario 5600 Series - Page 58

United States December 16, 2002
Maintenance & Service Guide
Presario 5600 Series Personal Computers
MSG Index | Home | Preface | Product Description | Troubleshooting | Illustrated Parts | Removal &
Replacement
Jumpers & Switches | Specifications | Connector Pins | Power Cord Requirements
Removal and Replacement
Processor
Disassembly
Sequence
Hood
Front Bezel
Card Guides
Fan
USB Cables
Creativity Center
Mass Storage Devices
Memory
Option Card Retainer
Graphics Board
Fax/Modem
Serial Port
Homenet Daughter Board
Processor
Processor Goal Posts
System Board Cables
System Board
RTC Battery
I/O Panel
Power Supply
Removal
1.
Complete
the
preparation for
disassembly
procedures.
2.
Remove the
hood.
3.
Remove fan.
4.
Push in the
release tabs
on the ends
of the
processor
goal posts 1.
5.
Unplug the
processor
from the
system
board and
slide out
from the
goal posts 2.
Replacement
To replace
the
processor,
reverse the
removal
procedure.
privacy statement and legal notices