8-13
HOW TO USE YOUR CARAVAN’S EQUIPMENT
ALDE HEATING
Alde 3020 Control Panel
Starting the boiler
• Press the On/Off button and the start-up
display is displayed. The boiler starts with
the last selected setting.
The control panel in standby mode
A. Clock
The clock shows day and time.
B. Outdoor temperature
The outdoor temperature is displayed if a
sensor probe is mounted.
C. Indoor temperature
The indoor temperature is displayed
automatically.
D. Circulation pump
This symbol is displayed when the
heating pump is requested.
E. LPG bottle full/empty
This symbol is displayed when the
sensor on the cylinder changeover is
connected and activated.
F. 230 volts
This symbol is displayed when 230V is
connected to the boiler.
G. MENU button
Button for setting menu.
H. On/Off button
Shut down / turn on the boiler.
From standby mode to setting menu
When on standby, the indoor temperature is
displayed and the outdoor temperature is
displayed if an outdoor temperature sensor
has been connected. The background lights
up when you press the screen or the MENU
button. Start the setting menu by pressing the
MENU button. The background lights up and
those functions which can be set are
displayed. The settings are automatically
saved after 10 seconds. The control panel
reverts to standby automatically after 30
seconds if no buttons are pressed (or if the
MENU button in the setting menu is pressed).
Control panel in standby
Control panel in setting
+22°C
+6°C
Fri 18.30
D
C
A
HG
EF
B
f
3020
To Next Page
Loading...