8-46
HOW TO USE YOUR CARAVAN’S EQUIPMENT
AL-KO Trailer - Control
AL-KO Automatic Trailer Control is an
electronic control system that reacts quickly
to maintain the stability of the car and
caravan. The system continually monitors the
stability of the caravan during a journey and
operates when an unstable condition is
encountered. When AL-KO ATC activates,
the driver will feel the vehicle being slowed
down by the soft braking of the caravan.
AL-KO ATC LED OPERATION
Flashing Green - Simply the ATC is waiting
to detect movement. Drive a few metres
and the light will change to green.
Flashing Red - To provide further
explanation if the constant RED light is
showing: There are a number of errors
that the ATC logs and some are self
repairable by the customer but some will
require the ATC to be monitored by the
diagnostic equipment that is available and
the AL-KO service engineers are trained to
use.
Display ATC Condition Diagnosis What to do Outcome Status
Colour
Green ATC Active Everything OK
Green Flashing ATC Active Self test Drive forward Green Ready for
incomplete to detect (Constant) journey
movement to
complete self
test and
recheck LED
Red ATC Inactive Possible to Remove 12S Green Ready for
continue journey or 13 pin plug journey
and wait five
seconds.
Reconnect Red ATC fault
plug detected
but can be
driven
Red flashing ATC has Do not continue Remove 12S Green Ready for
detected a fault with ATC or 13 pin plug journey
connected and wait five
seconds
Reconnect Red ATC fault
the plug. (flashing) detected
cannot be
driven.
Remove
pushrod
To Next Page
Loading...