8-20
HOW TO USE YOUR CARAVAN’S EQUIPMENT
User Instructions Whale Watermaster® Exterior Water Pump Socket
The Whale Watermaster® Easi – Slide™ Socket simply connects to the Whale Watermaster®
with Easi – Push ™ Plug. It is designed for use in recreational vehicles to supply freshwater to
caravans and motorhomes. Please note that caravan water systems and domestic water
systems differ. Please exercise caution when using the hot water supply. It is easier to get
unmixed hot water when the tap or shower is initially opened.
For information on our full product range visit: www.whalepumps.com
Please note -The manufacturer cannot be held responsible for claims arising from incorrect
installation, unauthorised modification or misuse of this product.
This product is designed for use with freshwater. If it is intended for use with any other liquid, it is
the user’s responsibility to ensure that the materials are fully compatible with the liquids to be
used and that a system of safe working practice is applied to installation, use and maintenance.
Ensure that the system is fully drained before starting the installation. Open and close all outlets
to expel water and air.
To Connect the Submersible Pump:-
Please check that the submersible pump can reach the bottom of the water container and that
there is access to the back of the socket.
Step One - Open Easi-Slide
TM
Socket as shown below
Step Two- Connect Easi - Push
TM
Plug
Step Three - Ensure the socket lid is locked in place.
You will hear a click.
Step Four - Ensure the exterior water pump can reach
the bottom of the water container.
To Next Page
Loading...
