EasyManuals Logo

Compex performance User Manual

Compex performance
Go to English
313 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #271 background imageLoading...
Page #271 background image
269
English
6a Press the On/Off button to interrupt the test
at any moment. To relaunch the test from the
start, press any of the 4 +/- buttons.
6e The m logo above channel 4 indicates that
the m-4 cable is connected to the
stimulator. The figures in channel 4 will
automatically change during the test as the
sensor records different measurements. The
4 +/- buttons will be disabled for the duration of
the test.
Once the test is complete, you will automatically
be taken to the default programme start screen
and prompted to increase the stimulation
energies.
Adjusting stimulation energies
When you start a programme, you will be
prompted to increase the stimulation
energies. This is critical to the success of
any treatment. To find out what energy
level needs to be reached for each
programme, refer to the specifc
applications.
Programme
time in minutes
and seconds
The animated rising
convection symbol
represented the
warming-up sequence
Session progression scale.
For details on how it works,
see the following section:
"Programme progression"
7a Press the On/Off button to place the unit in
Pause mode.
7b c d e The Compex bleeps and the symbols
of the four channels flash, changing from + to
000: the four channels are at 000 energy. You
must increase the stimulation energy so that the
stimulation can start. To do this, press the
+ buttons for the relevant channels until the
desired setting is reached. If you want to
increase the energy level of all four channels
simultaneously, press the "i" button, located
below the On/Off button. Press the "i" button
twice to increase the levels in the first
3 channels, and 3 times to increase the levels in
the first 2 channels. When you press the "i"
button, the associated channels are highlighted in
white on a black background.
Programme progression
Stimulation actually starts when the
stimulation energy has been increased.
The examples reproduced below are
sufficient to understand the general rules.
PERFORMANCE FR DE IT ES EN:ENGY Man FR 14/02/08 15:11 Page 269

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Compex performance and is the answer not in the manual?

Compex performance Specifications

General IconGeneral
Number of Channels4
Power SourceRechargeable Battery
CategoryFitness Equipment
BrandCompex
Program CategoriesRecovery, Strength

Related product manuals