Compex performance - Personalising a Programme; During the Stimulation Session

268
English
6. Personalising a
programme
The programme personalisation screen is
not available for all programmes!
5a Press the On/Off button to return to the
previous screen.
5b Some programmes require manual selection
of the muscle group you want to stimulate. This
muscle group is shown in black on a small
figurine above channel 1. Use the channel 1 +/-
button to select your chosen group. The seven
muscle groups proposed are shown successively
in black on the small figurine:
vb Abdomen and lower back
f Buttocks
c Thighs
j Legs and feet
m Forearms and hands
e Shoulders and arms
td Thorax and back
Current international standards
require that a warning be given
concerning the application of electrodes to
the thorax (increased risk of cardiac
fibrillation).
N.B.: If a cable fitted with the m-4
system (sold separately) is connected to
the device, the muscle group is selected
automatically.
5c Press the channel 2 +/- button to stop the
warming-up sequence (closing the small
animated rising convection symbol above the
radiator).
5d Press the channel 3 +/- button to choose the
programme difficulty level.
5e Press the channel 4 +/- button to confirm
your choices and launch the programme.
7. During the stimulation
session
Preliminary m-3 test
The m-3 test is launched only
if a cable fitted with the m-4 system
(sold separately) is already connected to
the stimulator when this is turned on!
It is essential that you remain completely
still and relaxed during the entire test.
If the m-4 system is connected, the
test starts immediately after programme
selection and personalisation.
PERFORMANCE FR DE IT ES EN:ENGY Man FR 14/02/08 15:11 Page 268