CompuLab fitlet3 - Expansion Boards; Optional Accessories

www.fit-iot.com
Page 7 of 22
fitlet3 owner’s manual
Hayetsira St. 17, Yokneam, Israel
Tel: +972-48-290-168 | Fax: +972-48-325-251 | www.fit-iot.com
Expansion boards
Name
Description
Compatible connector
FC3-LAN
2x GbE LAN on RJ45
M.2 Key-E (FACET)
1
FC3-POED
GbE LAN PoE device on RJ45
M.2 Key-E (FACET)
1
FC3-OPLN
GbE on SFP+ for optic LAN
M.2 Key-E (FACET)
1
EB-M2SATA
SATA expansion for 2.5” HDD /
SSD
2,3
M.2 Key-M or M.2 Key-B
Notes:
1. FACET expansion card and Wi-Fi/BT card are mutually exclusive. For Wi-Fi/BT on systems with FACET cards,
on-board Wi-Fi/BT module bust be selected.
2. Up to 1 unit of EB-M2SATA is possible, and up to two storage devices in total.
3. EB-M2SATA expansion requires deep bottom that will enlarge the fitlet3 size.
Optional accessories
Name
Description
FITLET3-ACC-PSU
Universal power supply unit (one units is included in fitlet3 package)
FITLET3-ACC-BRKT
VESA mounting bracket
FITLET3-ACC-DIN
DIN rail mounting kit (Requires VESA mounting bracket)
FITLET3-ACC-DINSD
Side DIN rail mounting kit (does not require VESA mounting bracket)
FITLET3-ACC-POWBTN
Remote power button with LED with 25cm wire