Hayetsira St. 17, Yokneam, Israel
Tel: +972-48-290-168 | Fax: +972-48-325-251 | www.fit-iot.com
Quick start guide
Minimum requirements
To use fitlet3 you will need:
• RAM and storage device (if not pre-installed)
• A display with HDMI or DisplayPort input + HDMI or mini-DisplayPort cable
• USB keyboard and mouse
Identifying fitlet3 configuration
fitlet3 configuration is detailed on the label attached to the bottom side of the
computer.
Note
Pay attention to RAM and storage. If not installed, fitlet3 will not boot. You will
have to install these devices firstly.
To Next Page
Loading...
