5-6
DTMF Programming Commands (Repeater)
ENTRY DESCRIPTION DEFAULT
*27 READ WEATHER STATION DATA SETTING
*30XX SEND VOICE MESSAGE (01-12)
*31XX PROGRAM VOICE MESSAGE (01-12)
*32XX ERASE VOICE MESSAGE (01-12)
*501* PROGRAM CONTROL OPERATOR NUMBER (REPEATER INPUT) 100
*502* PROGRAM VOICE DEMOSTRATION PREFIX 700
*503* PROGRAM DTMF PAD TEST NUMBER 375
*504* PROGRAM WEATHER REPORT PREFIX 200
*505* PROGRAM LINK DISCONNECT NUMBER 5000
*506* PROGRAM LINK CONNECT NUMBER 5001
*507* PROGRAM LINK RECEIVE ONLY NUMBER 5002
*508* PROGRAM CONTROL OPERATOR NUMBER (LINK INPUT) 300
*601* PROGRAM REPEATER TIME-OUT TIMER (60 - 1799 SECONDS) 300
*602* PROGRAM LINK TIME-OUT TIMER (60 - 1799 SECONDS) 300
*603* PROGRAM REPEATER ID TIMER (60 - 1799 SECONDS) 480
*604* PROGRAM LINK AUTO DISCONNECT TIMER (60 - 1799 SECONDS) 600
*605* PROGRAM BEACON MODE TIMER (60-1799 SECONDS) 60
*606* PROGRAM LOGIC INPUT MESSAGE TIMER (60-1799 SECONDS) 600
*610* PROGRAM COR DROP TO COURTESY BEEP TIMER (0.1 – 9.9 SECONDS) 1.0
*611* PROGRAM COURTESY BEEP TO PTT DROP TIMER (0.1 – 9.9 SECONDS) 4.0
*91 TRANSMIT AUDIO TEST TONE (REPEATER)
*92 TRANSMIT AUDIO TEST TONE (LINK)
*93 TRANSMIT AUDIO TEST TONE (REPEATER + LINK)
*9X READ COURTESY TONE (4-5-6-7)
*94X PROGRAM REPEATER COURTESY TONE (0–6) TONE 5
*95X PROGRAM REPEATER COURTESY TONE WITH LINK ENABLED (0–6) TONE 1
*96X PROGRAM LINK COURTESY TONE (0–6) TONE 2
*97X PROGRAM LINK COURTESY TONE WITH LINK IN RECEIVE ONLY (0–6) TONE 4
*0 MANUAL EXIT OF PROGRAMMING MODE
To Next Page
Loading...
Need help?
General