THIS DOCUMENT IS THE PROPERTY OF XICOM TECHNOLOGY. REPRODUCTION OR RELEASE WITHOUT EXPRESS PERMISSION IS STRICTLY PROHIBITED.
XTD-400C, 5.85 – 6.425 GHz, RO1
Document No. 305-0386-201 REV 2 Page 6 of 11
3.2 MECHANICAL
The following paragraphs specify important mechanical details pertaining to this product. The specific
locations can be identified on the outline drawing specified in paragraph 3.2.1.
3.2.1 Outline Per Xicom drawing 304-0357-008
3.2.2 Connectors
3.2.2.1 AC Power AMP T3110-003
3.2.2.2 RF Input Type N-female, front panel
3.2.2.3 RF Output CPRG-137, Tapped, rear panel
3.2.2.4 RF Sample Type N-female, front panel
3.2.2.5 Monitor & Control MS3114E1832SW, front panel
3.2.2.6 AUX / WG SW interface MS3114-E-14-18S, front panel
3.2.3 Cooling
3.2.3.1 Air Intake Rear & Bottom surfaces
3.2.3.2 Air exhaust Front surface
3.2.4 Weight 57 lbs (25.85 kg) max
4.0 ENVIRONMENTAL
4.1 Non-operating
4.1.1 Temperature, non-operating -50 to +70 C
4.1.2 Shock, Vibration Normal transportation
4.2 Operating
4.2.1 Temperature -40 to +50 C
4.2.2 Humidity Up to 100% condensing
4.2.3 Altitude, operating 0 to 10,000 ft MSL
Derated 2° C/1000 feet
4.2.4 Cooling Forced air
EAR EXPORT CONTROLLED: The information contained in this Manual refers or relates to a product that is subject
to the U.S. Export Administration Regulations (EAR). Transfer of data herein by any means to a Foreign Person,
whether in the U.S. or abroad, may require an export license from the U.S. Department of Commerce.
To Next Page
Loading...
