To Next PageTo Next Page
Need help?Do you have a question about the Comtech EF Data LPOD and is the answer not in the manual?
General| Brand | Comtech EF Data |
|---|---|
| Model | LPOD |
| Category | Amplifier |
| Language | English |
Provides installation and operation information for the Comtech EF Data LPOD family of Outdoor Amplifiers.
Details Comtech EF Data's warranty policy, limitations, and exclusive remedies for the LPOD.
Provides contact details for technical support, customer service, and repair/upgrade procedures.
Describes the LPOD as a cost-effective, reliable replacement for TWT amplifiers in satellite communications.
Details features like Solid-State Advantage, Enhanced Standard Features, and Built-in Redundancy.
Explains the theory of operation and presents block diagrams for LPOD PS 1/1.5 and PS 2 units.
Provides a detailed summary of LPOD characteristics, environmental, and physical specifications.
Illustrates the dimensional envelopes for LPOD PS 1, PS 1.5, and PS 2 units.
Summarizes connectors for external connections and provides an overview of system setup.
Details the connector specifications and pin assignments for AC and DC power inputs.
Guides on standalone installation and the procedure for turning on the LPOD unit.
Details steps for preparing the firmware download, including user-supplied items.
Explains how to download and extract firmware update files from the Comtech EF Data website.
Provides instructions for transferring firmware files via FTP and rebooting the unit.
Describes SNMP, Telnet, and Web Server interfaces for LPOD remote management.
Covers SNMP community strings, MIB files, and trap configurations for LPOD management.
Details Telnet interface operation and enabling/using the Web Server Interface.
Explains menu tree, page navigation, page sections, action buttons, and data entry.
Describes Home, Admin, Config, and Status pages for LPOD monitoring and control.
Details RF input level, attenuator control, mute control, and fault conditions.
Explains EIA-485, EIA-232, basic protocol, and packet structure for serial communication.
Lists and describes serial commands and queries for LPOD management.
Explains LPOD's use in a redundancy configuration with appropriate cabling.
Guides on setting up 1:1 redundancy systems and troubleshooting connectivity issues.
Lists commands applicable to redundancy operations like RED, ESW, AFR, and AOF.
Details serial interface, Ethernet, and COM cables for LPOD applications.
Describes Type 'N' 1/4" Heliax Coaxial Cable for LPOD Rx/Tx connections.
Step-by-step guide for cleaning the heat sinks of the LPOD PS-1 model.
Step-by-step guide for cleaning the heat sinks of the LPOD PS-1.5 model.
Step-by-step guide for cleaning the heat sinks of the LPOD PS-2 model.
