Comtech EF Data LPOD - Returning a Product for Upgrade or Repair

LPOD Outdoor Amplifier / Block Up Converter (BUC) Revision 9
Preface MN-LPOD
xvii
Returning a Product for Upgrade or Repair
Step Task
1
Go to the Comtech EF Data Service page (http://www.comtechefdata.com/
service.asp) and read the Return Material Authorization section in its entirety.
2 Request a Return Material Authorization Number:
• On the Comtech EF Data Home page: From the SUPPORT column at the
bottom of the page, select the RMA Request hyperlink;
OR
• On the Comtech EF Data Support page: Click [Send RMA Request];
OR
• On the Comtech EF Data Service page: Select the Return Material
Authorizaion hyperlink;
• Fill out the RMA form completely;
• Click [Send Email].
Alternately:
• Send an e-mail providing this same detailed information to Comtech EF Data
Customer Service (service@comtechefdata.com).
•
Contact Comtech EF Data Customer & Technical Support by phone or fax.
3 Pack the product in its original shipping carton and protective packaging.
4 Ship the product back to Comtech EF Data. Shipping charges should be prepaid.