Comtech EF Data LPOD - Ethernet-Based Monitor and Control; Figure A-2. Ethernet-Based M&C Using CEFD Kit KT-0000203

LPOD Outdoor Amplifier / Block Up Converter (BUC) Revision 9
Appendix A MN-LPOD
A–7
1:1 REDUNDANCY APPLICATIONS
A.5 Ethernet-based Monitor and Control
Ethernet-based Remote Product Management/Monitor and Control (M&C) of any LPOD
Standalone or 1:1 Redundancy application is available through use of the optional LPODnet
M&C Netbook Accessory Kit (CEFD Kit KT-0000203). This kit provides the user with on-site access
to the LPOD’s remote Telnet, SNMP, or HTTP Web Server interfaces. For detailed information
about this optional accessory, see the LPODnet M&C Accessory for LPOD/SPOD PS 1, PS 1.5, PS
2 Operation Manual (CEFD P/N MN-LPODNET).
STANDALONE APPLICATIONS
Figure A-2. Ethernet-based M&C using CEFD Kit KT-0000203