THIS DOCUMENT IS THE PROPERTY OF XICOM TECHNOLOGY. REPRODUCTION OR RELEASE WITHOUT EXPRESS PERMISSION IS STRICTLY PROHIBITED.
XTD-400C, 5.85 – 6.425 GHz, RO1
Document No. 305-0386-201 REV 2 Page 7 of 11
5.0 TESTING REQUIREMENTS
5.1 Acceptance Test Procedure (ATP) requirements.
Frequency 3.1.1
Power 3.1.2
Transfer curve at mid-band 3.1.2
Reflected Power Protection 3.1.2.2
Gain, large signal 3.1.3
Gain, small signal 3.1.4
Gain flatness, small signal 3.1.5.1, 3.1.5.2, 3.1.5.3
Gain Control 3.1.6
Harmonic output 3.1.8
Spurious signals 3.1.14
Prime Power 3.1.16
Sample Port Calibration N/A
5.2 First Article Test Procedure (FAT) requirements.
FAT testing is done per the specified agreements between Xicom and it’s customers.
The FAT test shall include at a minimum the ATP. Please specify the FAT
requirements at the time of order of the product.
EAR EXPORT CONTROLLED: The information contained in this Manual refers or relates to a product that is subject
to the U.S. Export Administration Regulations (EAR). Transfer of data herein by any means to a Foreign Person,
whether in the U.S. or abroad, may require an export license from the U.S. Department of Commerce.
To Next Page
Loading...
