DeviceMaster Installation and Configuration Guide: 2000594 Rev. F DeviceMaster Security - 85
Using a Web Browser to Set Security Features
Using a Web Browser to Set Security Features
The follow procedures are discussed below:
• Changing Security Configuration
• Changing Keys and Certificates on Page 86
Changing Security Configuration
Use the following steps to change security settings in the DeviceMaster.
1. Enter the IP address of the DeviceMaster in the Address field of your web browser and press the Enter
key.
2. Click Network | Security.
3. Click the appropriate check boxes to enable or disable security for your environment.
Refer to the help system or Configure/Enable Security Features Overview on Page 79 for detailed
information.
4. After making changes, click Save.
To Next Page
Loading...
