（MT series remote control intelligent turntable manual）3
10 Shenzhen Comxim Technologies Co., Ltd. Copyright 2015
the next 22.5 degrees. Repeat 16 times, 22.5 degrees per rotation at a time(16*22.5° = 360°).
The method is often used to produce 16 frames of GIF animation. As shown in Figure 9, you can
press the start / stop to stop this operation in the process of rotation, such as the turntable
that has been stopped, then press start / stop, and then repeat a circle (16*22.5 = 360).
If your device has automatic shutter function (model :MT370BSL* or MT600BSL* ). Then the default
check "automatic shutter", when the rotation of the turntable is suspended, it automatically sends out the
shutter signal. If need to be suspended during the turntable control camera to take pictures, only need to use
the shutter line connecting the turntable and the camera.
Figure 8 Set 16 stops per circle, pause for 5 seconds.
To Next Page
Loading...