（MT series remote control intelligent turntable manual）3
2 Shenzhen Comxim Technologies Co., Ltd. Copyright 2015
Note：
1. "Yes" indicates support for this feature, "No" indicates that the feature is not supported.
2.The above form is unknown, before buying, welcome to consult us, lest cause misunderstanding.
3.If you need to change the turntable in accordance with their own ideas to go to some of the features, but also please contact us. (extra
charge)
4."1" column indicates the test conditions for flexible load test, such as the standing test, Bucket test Etc.
（On the rigid load, the starting load is less than that of the flexible load, the rotating load is equal to the flexible load, the rigid load such as
the metal, stone, etc.）.The load test is no more than the rotary table diameter.
5.The turntable uses a large range of frequency conversion speed regulation, the part of the low frequency (individual Gear) has a trace of
low frequency noise (very small, very small), is a normal phenomenon, does not affect the use, and does not affect health, please rest
assured that use.
3. Main Characteristics
3.1 TurnTable feature List(only MT370BSL* and MT600BSL* Support all
Spec.)
Diameter: 37.8cm.(MT370) or 60CM(MT600)
Height: 8cm(MT370) or 15cm(MT600)
Mark: the sign in the center (MT370)
Color: color support (porcelain white, black pearl, sky blue), default white. (MT370)
Load:MT370BSL100 maximum 100KG / MT600BSL300 maximum 300KG
Speed: remote control 12 gear , Equipped with 31 key remote control (MT370)
MT370BSL60 speed range:15 sec/loop ~ 48 sec/loop,3 sec a level.
MT370BSL100 speed range:30 sec/loop ~70 sec/loop.3.6 sec a level.
Speed: remote control 12 gear , Equipped with 31 key remote control (MT600)
MT600BSL300 speed range:18sec/loop ~120 sec/loop. 3 sec a level.
To Next Page
Loading...