（MT series remote control intelligent turntable manual）5
Shenzhen Comxim Technologies Co., Ltd. Copyright 2015 15
Figure 16 Install New APP , support more function
8. PC Windows software
8.1 Software introduction
Through the PC Windows software, can achieve the turntable control, PC Windows software control
turntable can achieve infrared remote control all functions, and can realize the function of some infrared
remote control can not complete.
System requirements:
Hardware: a computer with a Bluetooth enabled computer, or a USB interface, which can be used with a
Bluetooth adapter.
Operating system: XP/2003 Server/Vista/2008 Server Windows, 7/8/10 Windows operating system.
8.2 Connecting equipment
Note: if the first use of this software, or have not yet been installed to drive and add a Bluetooth device, please first
in accordance with the 8.4 Bluetooth adapter driver installation section is shown to complete the driver installation and
Bluetooth devices (turntable) add, and remember the device corresponding to the virtual serial port number(Comx),
the device can only be added once, the next can be directly connected with the virtual serial port.
Start the PC Windows software TurnTable, select the device virtual serial port number, as shown in the figure
below (this option COM17, if not know the turntable corresponding virtual serial port number, in accordance
To Next Page
Loading...