(MT series remote control intelligent turntable manual)5
Shenzhen Comxim Technologies Co., Ltd. Copyright 2015 25
Step2. To test turntable control camera (the first use is necessary):To start the smart turntable (Reference
documentation: How to connect the computer to the turntable), adjust the speed of their own needs, open
the camera, manual adjustment of the camera focus, to ensure that the focus is accurate, (Be sure to focus,
the camera focus mode is set to M, Not use AF) Then press the remote control “ ”button, If the
camera can take pictures, it is normal to prove the connection. Note:need to control the camera, you must
check the software interface, automatic shutter".
Step3. Set the turntable intermittent rotation: set the time of the suspension and the number of suspended.
With the shortcut button set, the default pause time is 4 seconds. As shown in the "1 setting", the 36 mode is
set: 10 degrees each time, pause 4 seconds each time, 36 times to complete a circle shot.
Step4. To start taking pictures: press left turn (or right) start the turntable, the turntable can rotate
intermittently, pause and send the shutter signal when the pause. If you want to stop, press the start / stop
button to stop.
10.3 Software and manual download:
11. FAQ
1. Q:After power on of the turntable no response (buzzer not beep, power source / Bluetooth indicator
light is not bright).
A: 1) power module external AC220V socket is there electricity? Replace power outlet try.
2)The power module is connected with the turntable correctly?
2. Q:After the turntable is turned on, the normal tweet but is not rotated, or only a very small angle is
rotated.
A: May be the turntable to save the intermittent rotation, and the rotation angle is small, and the
suspension time is very long, repeat number isToo little,so that the user is difficult to detect the turntable turn
http://www.comxim.com/Download/ViewDoc?DocId=20141213_160935_6815
http://www.comxim.com/Download/ViewDoc?DocId=20141213_154443_3166
http://www.comxim.com/Download/ViewDoc?DocId=20141213_151405_5233
Scan: Detailed
instruction QR code
Scan: PC Software
QR code
Scan: Android APP
QR code