Before Using Your Conbrov WF98 Camera
1.Charging Your Camera
10
(1)Charge the camera for about 30 minutes via
your PC or USB charger 5V/1A.
(2)Connect the supplied USB cable to the Micro
USB port and a suitable USB port on your PC or
a USB charger (separate charger not included).
(3) While charging, the LED lights up red and
turns off completely when the camera is fully
charged.
Steady red
Off
Charging
Fully charged
Fully charged
Red Indicator
Off
2.Installing the MicroSD Card
Removing the microSD card
(With the contacts facing down)
Installing the microSD Card
To Next Page
Loading...
