IP CAMERA QUICK START GUIDE
6. Caution
Safety Precautions
1. This installation should be made by qualied service personnel and should adhere to all
local codes.
2. Avoid installation on a surface subjected to frequent vibration or shocks.
3. Do not operate the camera beyond its specied temperature range or power source
ratings.
4. Should any damage or suspected damage occur, shutdown the power source, unplug
the camera, and contact your service provider.
5. Do not install the camera under unstable lighting conditions. Severe lighting change or
icker can cause the camera to work improperly.
6. Never use the camera close to a gas or oil leak.
7. Do not disassemble the camera.
8. Never let the camera directly face a strong light source.
9. Ensure all removable covers are replaced to protect the inner components.
10. Do not install near devices which emit a strong electro-magnetic eld.
11. Use a dry or damp cloth only for cleaning.
CAUTION
PLEASE FOLLOW THE ABOVE PRECAUTIONS – FAILURE TO DO SO MAY INVALIDATE THE
WARRANTY OR CAUSE SERIOUS INJURY.
Note: Changes or modications not expressly approved by the manufacturer can cause the
camera to be damaged and become inoperable. This may invalidate the user warranty.
To Next Page
Loading...
