6.2 SOS numbers setting
6.2.1 Add SOS number by SMS
SMS command: SOS,A,number 1,number 2,number 3,number 4#(A means add number)
For example: SOS, A,13510682360,13511685136,13612687248,13612683621#
4 SOS numbers can be set at one time. It will reply “OK” if succeeded.
SOS,A,13527852360# means set the first specific number
SOS,A,,,13527852360,12510682360#means set the third and fourth SOS number
6.2.2 Delete SOS numbers by SMS
SMS command: SOS,D,1,2,3,4# (D means to delete SOS number)
For example: SOS,D,1# means to delete the first number
SOS,D,3# means to delete the third number
To delete several numbers at one time, SMS command can be: SOS,D,1,2,4# means to
delete the first, second and the fourth numbers
If you do not know the serial number, you can also delete number by SMS command like
this: SOS,D,number#
For example: SOS,D,13527852360# means delete this SOS number directly.
It will reply “OK” if succeeded.
6.2.3 Add SOS number via platform
You can set SOS numbers via the platform when the device connects to the platform.
Note: Only the SOS number can make the operation as remote defense, monitoring and
SMS checking position.
6.3 Arm/disarm
There are 3 methods to activate/deactivate defense status.
6.3.1 Via SOS button
Short press SOS button twice to activate defense status. The three LEDs will flash slowly
one by one. After 3mins, the device will enter the defense status, and the LEDs will then
flash quickly one by one.
To Next Page
Loading...
