EasyManua.ls Logo

Concox GT03A - Anti-theft and Vibration Alarm

Concox GT03A
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Short press SOS button twice again to deactivate defense status
6.3.2 Via Calls
Any SOS number calls the device and then ends up the call by the mobile side in 10s, the
device will enter defense status and then reply SMS Remote setting up defense
Successful”. If the SOS number does not end up the call in 10s, it will activate monitoring
function.
Any SOS number calls the device and then ends up the call by the mobile side in 10s, it will
disarm status from the arm status and then reply SMS “Remote disarm succeeded”. if not
ends up the call in 10s, the device will enter voice-monitoring status.
6.3.3 Via SMS command
Send SMS 111” to arm. And the device will reply SMS Remote setting up defenses
Successfulif it is set successfully. Only SMS from SOS numbers is valid.
Send SMS 000” to disarm. And the device will reply SMS Successful remote disarmif it is
set successfully. Only SMS from SOS numbers is valid.
Note
1 If you put the device in the car, please do not set arm when you are driving as it will
activate the vibration sensor.
2 Only SOS numbers can set arm or disarm.
3 Device SIM card should activate caller-ID function.
6.4 Anti-theft alarm
In defense status, once there is a vibration, the device will send alarm SMS to the SOS
numbers in 10s.
If the device is located, it will send accurate GPS location to SOS numbers. Otherwise, it
will send LBS location first. Once it is located successfully in 2 minutes, the device will send
a GPS location.
Example:
GPS location: “vibration ,Alarm: Date time”12-10-31 20:08:18
http://maps.\google.com/maps?q=N22.577169,E113.916790.”
LBS location: “vibration ,Alarm: Date time12-10-31 20:08:18
http://maps.\google.com/maps?q=N22.577169,E113.916754.“

Related product manuals