Condor XC-002 User Manual

Mechanical Key Cutting Machine CONDOR XC-002
4.3.2 MAIN HANDLE
1) Pull or push the handle up and down to adjust the height of tracer and
cutter. When releasing the handle, tracer will back to the original
position.
2) Tighten the handle in the clockwise direction can fix the position of
tracer and cutter.
3) The operation strength should be proper to avoid damage.
9

Condor XC-002 Specifications

General

Brand	Condor
Model	XC-002
Category	Cutter
Language	English